High Efficiency Zyd-T-W 10000liter/Hour Insulating Oil Purification Treatment for Electric Power Transmission

• Customization: Available
• Certification: ISO9001, CE
• Application: Transformer Oil, Insulating Oil, Cable Oil, Switchgear Oil, etc.
• Model NO.: ZYD-T-W
• Voltage: 380V, 50Hz, 3phase, Customer′s Requirement
• Folw Rate: 1800 Lph to 30000 Lph
• Color: Blue, White, Green, Yellow, etc.
• Weight: 500kgs
• Working Vacuum Degree: -0.08 ~ -0.099 MPa
• Delivery Time: 15 Days
• Application Oil: Transformer Oil, Insulating Oil, Cable Oil, Switch
• Warranty Period: 2 Years
• Certificates: ISO, CE, SGS
• Operation Mode: Operation Mode
• Working Hours Without Trouble: 4000 Hour
• Continuous Working Hours: 150 Hour
• Working Noise: 65 ~ 85dB(a)
• Cooling Method: Cooling Method
• Transport Package: in Exportation Plywood Case
• Specification: 1380*1020*1760mm
• Trademark: FUOOTECH
• Origin: Chongqing, China
• HS Code: 8421299090
• Production Capacity: 5000 Sets/Year
• Package Size: 138.00cm * 102.00cm * 176.00cm
• Package Gross Weight: 500.000kg

Product Description

Weather Proof Type Series ZYD-T-W Double-stage High Vacuum

Transformer Oil Purifier Machine

 

Product Description

Introduction

Fully enclosed double-stage vacuum oil purifier is an excellent machine, with excellent features, very suitable for outdoor work.The device is designed to prevent wind, dust and rain from interfering with its operation and is ideal for use in adverse weather conditions.

ZYD-T-W insulating oil treatment plant also has the functions of dehydration of transformer oil, filtering of transformer oilparticles and pumping vacuum of transformer. The device will give an alarm signal when it is abnormal or needs maintenance.

 

Technical Parameters

Parameters		Model Unit	ZYD-T-W-30	ZYD-T-W-50	ZYD-T-W-100	ZYD-T-W-150	ZYD-T-W-200	ZYD-T-W-250	ZYD-T-W-300
Flow Rate		Liter/hour	1,800	3,000	6,000	10,000	12,000	15,000	18,000
Recommended Max. oil volume in one storage tank		Tons	6	12	24	40	60	90	110
Relative Working Vacuum Degree		MPa	-0.08 ~ -0.099 MPa
Absolute Operating Vacuum Level		Pa	≤ 8 Pa
Working Discharge Pressure		MPa	≤ 0.5
Temperature Control		ºC	0 ~ 100
Operation Oil Temperature in Treatment		ºC	30 ~ 80 (65ºC is best)
Power Supply			AC 3~, 380 V, 50Hz, 4 Wire (or as per your requirements)
Operation Mode			Continuous Operation
Working hours without Trouble		Hour	4000
Continuous Working Hours		Hour	150
Ambient Temperature			-25 ~ 55ºC
Working Noise		dB(A)	65 ~ 85
Cooling Method			Air Cooling
Heating Power (adjusted available)		KW	30	72	90	120	135	150	180
Total Power		KW	36	78	105	136	150	170	206
Inlet/Outlet		mm	φ25	Φ32	φ50	φ50	φ50	φ60	φ60
Weight		Kg	500	900	1200	1400	1650	1800	1950
Dimension	Length	mm	1380	1710	1800	2010	2060	2100	2200
	Width	mm	1020	1510	1560	2030	2100	2150	2250
	Height	mm	1760	1860	2080	2080	2200	2450	2550
After Treatment
Dielectric Strength		kV	≥ 70 ~ 80
Water Content		PPM	≤ 3 ~ 5
Gas Content		%	≤ 0.1
Particle Size		μm	≤ 3
Cleanliness			≤NAS 1638 Grade 5
Note: 1. The dimension and weight will be changed with changing of technical specs.            2. All the specs can be customized according to client's requirements.

Oil Before and After Treatment

Features

1.ZYD-T-W adopt double vacuum separation technology, double stages thin film drying degassing technology, double evaporation area and degassing time.

2.Patented degassing tank: anti-foam structure & dual electronic foam monitoring system ( key components are from Switzerland), completely eradicating oil entering into vacuum pump.

3.Reliable Control System: Optimized design of control interlock protection device, over-pressure alarm and protection, phase sequence protection, to ensure whole machine working stably for a long time. Automatic pressure alarm system, automatic overload protection system, automatic constant temperature system, automatic foam elimination system, automatic protection of oil blowout prevention and other advanced technologies, ensures the safe and stable operation of unattended operation.

4.Oil atomized particles size is less than 50μm, largely increasing efficiency for water molecules and gas molecules escaping from oil molecules.

5.High density electrical heaters with surface efficiency below 1.5 W/cm2, with indirect heating to prevent local overheating and oil cracking & aging.

6.Install liquid level and temperature protector on the heater system to prevent instantaneous high temperature of heater and blank heating without oil.

7.Vacuum pump cooler preposition, to reduce water or vapor entering into vacuum pump, reduce the frequency to change vacuum pump oil and extend vacuum pump lifetime.

8.High precision filter elements, filter rated up to 1 (0.5 is optional) micron prevents particles from entering back into the transformer.

9.Automatic oil discharge pressure protector, to monitor pressure of oil filters all the time, effectively protecting machine and operators.

10.Adopt the high pressure screw type oil pump, keeping oil delivery stable, low noise, long life.

11.Automatic float ball valve & electronic oil level automatic controlling system, to realize automatic foam elimination, automatic oil level control, unattended operation.

12.Easy to operate, trouble reminder and trouble shooting tips.

Detailed Photos

Routine Maintenance Procedures

Filter element inspection, cleaning and replacement	After the filter element has been working for a period of time, when the pressure difference through the filter element increases to the design limit due to the clogging of dirt, the filter element must be maintained, including cleaning or replacement. The material and structure of the filter element determine whether it can be cleaned and how to clean it.
Note: Among the filter elements used in ZYD-T-W, the coarse filter element FL01 can be cleaned. Fine filter elements FL02, FL03 and vacuum pump oil filter elements cannot be cleaned and must be replaced.
Coarse filter element cleaning and replacement	When the vacuum degree reaches -0.07~-0.1Mpa, the oil viscosity is low, the oil inlet solenoid valve (SV01, SV02) is fully opened, and the oil inlet speed is still slower than the oil discharge speed of the oil pump, stop the machine and remove the suction filter. Net maintenance. The filter element can be cleaned in gasoline or alkaline cleaning solution, and the dirt attached to the mesh is blown away from the inside to the outside with compressed air. Before installation, check whether the filter screen is damaged, and replace it if found damaged.

Product Advantages

Working Principle

Certifications

Logistics & Payment:

Some of our main clients and partners:




FAQ
 

Q1. Are you a manufacturer, trading company or a third party? When and where did your factory established?
FUOOTECH: We are a manufacturer established since 2002, located at Chongqing city, China.

Q2. Will the products be tested before shipping?
FUOOTECH: Yes, of course. QC personal will have a strict testing procedure to all the products before shipping.

Q3. What's your warranty period?
FUOOTECH: We offer 24 months of warranty for all our products from the date of shipment. Even if the warranty period is expired, we still provide lifelong maintenance, technical service and spare parts supply.

Q4: What is the delivery time of your machine?
FUOOTECH: In general, the delivery time of our standard machine is about 15 days, customized machine will be delivered as the negotiation with our clients.
 

Q5. What is the usage of a vacuum oil purifier?
FUOOTECH: Dehydration, degassing, impurity removal of old oil, and extend oil life.

Q6. What is consumable?
FUOOTECH: There is no consumable except filters.