Fcf-3000 Portable Hfo Heavy Fuel Oil Purifier Centrifugal Oil Water Separator

• Customization: Available
• Certification: ISO9001, CE
• Application: Turbine Oil, Lubricant Oil, Engine Oil, Fuel Oil
• Model NO.: FCF-3000
• Voltage: 380V
• Condition: 100% Brand New
• Treatment Capacity: 1200 ~ 7000 Lph
• Heater Power: 30 ~ 120kw or Above, as Per Request
• Heater Temperature: 40 ~ 70 Degree C
• Working Pressure: Less Than 0.3 MPa
• Certificate: CE, ISO, CCC, SGS
• Sludge-Discharge: Automatic
• Cleanness: Nas 6 Grade
• Power Supply: 380V, 50Hz, 3pH (Customized)
• Transport Package: in Standard Exportation Plywood Case
• Trademark: FUOOTECH
• Origin: Chongqing, China
• Production Capacity: 5000 Sets/Year

Product Description

FCF-3000 Portable HFO Heavy Fuel Oil Purifier Centrifugal Oil Water Separator

Product Description

The centrifugal oil filter is assembled according to the requirements of shipowners, design institutes, shipyards or land users, and according to the separator system diagram confirmed by the other party, the separator, electrical equipment and related accessories are assembled. This unit is used to separate and purify fuel oil and lubricating oil in ship diesel engine fuel and lubricating oil systems. It can also be used to separate and purify fuel oil, lubricating oil and turbine oil in land power stations and diesel-generator systems.

The operating system of this machine is fully automatic control.
The separator head in this machine has been accurately dynamically balanced and has minimal vibration. It can run for a long time and is safe and reliable to use.

Product Parameters

 

 

Model		Unit	FCF-1000	FCF-1500	FCF-2000	FCF-3000	FCF-4000	FCF-6000	FCF-8000
Capacity		L/hr	1000	1500	2000	3000	4000	6000	8000
Running speed		r/min	8000 ~ 9500
Working Pressure		MPa	≤0.3
Temperature		ºC	0 ~ 100
Power Supply			380V, 50HZ, 3PH (Customized)
Sludge-discharge			Automatic
Water-discharge			Manual/Automatic
Continuous working time			≥150h
Trouble-free working time			≥5000h
Noise		dB(A)	≤80
Heater Power  (if included)		kW	24	30	36	42	60	78	90
Total Power		kW	27	33	39	46	66	86	101
Inlet & Outlet Diameter		mm	DN20	DN20	DN25	DN32	DN32	DN42	DN50
Weight		Kgs	580	650	760	850	980	1100	1400
Dimension	L	mm	1300	1380	1400	1450	1550	1660	1750
	W	mm	900	1000	1100	1150	1230	1350	1400
	H	mm	1400	1460	1500	1580	1650	1750	1800
After treatment			Water content: ≤ 100ppm
			Particles: ≤ 5μm
			Cleanness: NAS 6 grade

 Note:    1. The dimension and weight will be changed with changing of technical specs.
           2. All the specs can be customized according to client's requirements.

Equipment working principle :
Solid particles in the liquid will slowly settle to the bottom of the container under the influence of gravity. As shown in the figure, the deposition rate depends on the depth of the liquid. In order to speed up this rate, the only way is to reduce the depth of the liquid and increase the sinking area of the tank. As the heavier material sinks, the lighter liquid rises to achieve separation. In the ultra-high-speed rotating container, there are dozens of laminations with small gaps between each other. This gap makes the liquid depth described in gravity separation very small. Under the condition of high-speed rotation, gravity is replaced by centrifugal force, which increases thousands of times in an instant. Liquids (water and oil) with different densities and extremely fine particles with higher density are rapidly moved under the action of this powerful centrifugal force. Separate and discharge the separator in different ways. There are two separator mechanisms for automatic slag discharge and regular manual slag discharge.
RFQ

Q1. Are you a manufacturer, trading company or a third party? When and where did your factory established? 
FUOOTECH: We are a manufacturer established since 2002, located at Chongqing city, China.

Q2. Will the products be tested before shipping? 
FUOOTECH: Yes, of course. QC personal will have a strict testing procedure to all the products before shipping.

Q3. What's your warranty period? 
FUOOTECH: We offer 12 months of warranty for all our products from the date of shipment. Even if the warranty period is expired, we still provide lifelong maintenance, technical service and spare parts supply.

Q4: What is the delivery time of your machine? 
FUOOTECH: In general, the delivery time of our standard machine is about 15 days, customized machine will be delivered as the negotiation with our clients.

Q5. What is the usage of your centrifuge oil separator? 
FUOOTECH: FCF Series Centrifuge oil separator can effectively separate the large quantity of water and particles from HFO, DO, LO, Turbine Oil, etc. shortly.

Q6. What is consumable? 
FUOOTECH: There is no consumable except filters.

Q7. Who should I contact to get more information ?