| Customization: | Available |
|---|---|
| Structure: | Mobile |
| Usage: | Solid-Liquid Separation, Oil Impurities, Oil-Water Separator |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Plate Frame Pressurized Type Oil Purifier Series PL is specially designed for power station, electricity factory, power electrical substation of industrial and mining enterprise, lube oil depot, tractor station, petroleum, chemical engineering, metallurgy, national defense industry, etc, filtering water content and impurities of transformer oil, turbine oil, engine oil, EP gear oil, machine oil, diesel oil, hydraulic oil and as well as filtering edible oil while using stainless steel plates. It's a great choice as pre-treatment equipment prior to high vacuum oil purifier machines.
Plate Frame Pressurized Type Oil Purifier Series PL is made up of filtering bed, boosting type oil pump and rough filter. There are filtering media, such as filtering paper or filtering fuse, installed between the steel filter board and filter plate that will be fixed to form a single filtering room under the pressure of the packing device. The filtering paper or filtering fuse packed between the filter board and filter plate will play a role of filtering.
Special boosting type oil pump has strong suction ability and make the machine to be used in more oil types. Low noise, Quick and convenient to replace filter paper, Simple structure, Easy to use, Lower operation cost.
Due to the limitation of gear structure and installation structure, this machine is not suitable for the cleaning of high viscosity fluids. In regard to the non-lubricating oils like gasoline and kerosene (paraffin), special raw materials and motors need be equipped.
| Model | PL -50 | PL-100 | PL-125 | PL-150 | PL -200 | PL -300 | PL-500 | |||||||
| Flow Rate | m3/h | 3 | 6 | 7.5 | 9 | 12 | 18 | 30 | ||||||
| Working Pressure | MPa | 0 ~ 0.5 | ||||||||||||
| Filtering Area | ≥m2 | 0.39 | 1.3 | 1.54 | 1.89 | 2.01 | 3.1 | 4.6 | ||||||
| Board Frame Size | mm | 180×180 | 280×280 | |||||||||||
| Press Manner | Screw Manually | |||||||||||||
| Filter Frame Number | 10 | 10 | 12 | 14 | 18 | 23 | 29 | |||||||
| Filter Plate Number | 11 | 11 | 13 | 15 | 19 | 24 | 30 | |||||||
| Gear Oil Pump | Flow | L/min | >50 | >100 | >125 | >150 | >200 | >300 | >500 | |||||
| Safe Pressure |
MPa | 0.6 | ||||||||||||
| Power supply | 380V, 3Phase, 50hz (or as per user's option) | |||||||||||||
| Viscosity (mm2/S) | ≤46 | |||||||||||||
| Motor | Power | kW | 3 | 3 | 5 | 8 | ||||||||
| Rotation Speed | r/min | 1400 | 1440 | 1440 | ||||||||||
| Filtering precision | ≤ 3 µm | |||||||||||||
| Noise dB(A) | ≤ 55 | |||||||||||||
| Filter paper size | mm | 185*190 | 285*290 | |||||||||||
| Diameter | Inlet | mm | 25 | 32 | 32 | 44 | 44 | 50 | 50 | |||||
| outlet | mm | 32 | 44 | 44 | 50 | 50 | 65 | 65 | ||||||
| Dimension | Length | mm | 700 | 750 | 1120 | 1200 | 1620 | |||||||
| Width | mm | 300 | 600 | |||||||||||
| Height | mm | 720 | 920 | 1260 | ||||||||||
| Weight | Kg | 115 | 180 | 250 | 270 | 300 | 330 | 600 | ||||||
Diagrams
The machine is mainly composed of filtering bed, oil pump and Coarse filter components.
Filtering bed is operated continuously, by the pressure, the dirty oil is sucked into filtering groups which filtering to the side. The groups are made up of a set of alternately sorted filter plates, filter frames, and facility which has Manual Screw Press Device and press plate. There is a lug on the side of filter plate and filter frame to support on the layer board of the machine framework, and There are filtering medias, such as industrial filtering paper or filtering cloth, installed between the filter plate and filter frame that will be fixed to form a single filtering chamber between stationary Thrust plate and movable pressing plate under the pressure of the pressing device. The industrial filtering paper or filtering cloth plays the role of filtration.
There are two liquid holes equipped on the accordant places of filter plate and frame. After pressed, these holes form two integrated Channels. The waste oil is accessed from the trigonal side of the lug, filtered in the filtering chamber, pumped out from fan-shaped side of lug, finally clean oil is obtained.
While filtering, the waste oils are distributed to all the filter frames through the input channel, then enter into filter plates' liquid holes after pass through industrial papers. Finally, clean oil is integrated in the output channels and pumped to outside.
Meanwhile, the waste residues stay on the industrial paper surface, some water content is also absorbed by the papers. When the waste residues and water content are increased to a certain amount, the filtering resistance is also increased, when it's upto 0.2 ~ 0.35 MPa, filtration process should be stopped and filtering paper has to be replaced or cleaned.
The Gear Oil Pump and its motor is jointed by flexible rubber gasket. A relief valve is installed at the bottom of oil pump to avoid mechanical troubles because of overhigh pressure. Before delivery in factory, we will set the max pressure value 150%PN. Customer can adjust this value according to the actual situation, but the value can not be over max value.
The gear oil pump and motor are installed under the filtering bed. Oil pump transfer the oil to filtration system through discharge pipe and thrust plate. The oil pump is lubricated by the transferred oils. Coarse filter is installed prior to suction port, it's used to remove the big size particles and avoid the oil pump's breakdown from the big size particles' entry.
Coarse filter should be cleaned periodically: remove the screws & bolts, remove the cover, then take out the filter strainer to clean directly.
If there are some oil remaining in the chamber, open the oil return valve, suck them away to avoid the oil overflowing outside of machine.
FUOOTECH History
FUOOTECH Group is established in 2002, located at Chongqing city, China. It is engaged in designing, manufacturing and exporting various vacuum oil purifier machine, oil filtration system, oil regeneration machine, oil flushing system, oil testing machine,transformer vacuum pumping system, dry air generator, transformer & high voltage Tester, etc. All our products satisfy the international quality standard, passed CE and ISO 9001 certificate, verified by SGS.FUOOTECH's products are extensively used in the more than 45 industry lines including but not limited to the fields of electrial power, power station, power transmission,power distribution, power generation, petrochemical, petroleum, paper & pulp, compressor, mechanical manufacture, steel mills,electrical utilities, engineering contractors, metallurgy,railway, aviation, minging, etc. FUOOTECH's production facility is equipped in compliance with international industry standards and owns the most professional engineers and technical teams who systematically develop new equipment and improves existing product lines. More than 120 standard models are annually produced,tested well and offered to over 8,900 clients & end users from the 50 countries & regions. We also provide the OEM & ODM services by building the customized products according to client's special requirements.
){kind=link}