FUOOTECH Series COP-E Cooking Oil Purifier for Biodiesel, Vegetable Oil Filtration Plant, Palm Oil Treatment System, Coconut Oil Recycling Machine for Edible Purpose
Brief Introduction:
This machine is special designed for filtering waste cooking oil, dirty vegetable oil, palm oil, coconut oil, trench oil, swill oil, animal oil etc. It effectively removes particles, water, acid and alcohol etc. from the waste oil. The treated oil is clean, limpidity, and with good smell, so as to reach the edible standard again. Series COP-E is a good recycling machine for fried food factory, oil restaurant, cooking oil factory, vegetable oil factory, soap production, biodiesel production, and waste oil collecting store.
It is mainly used for purifying UCO used cooking oil, vegetable oil, KFC oil, edible oil, rape oil, sesame oil, peanut oil, coconut oil, beam oil, kitchen oil, bio-diesel oil, plant oil, wood oil etc. It dewaters, deodorizes, and eliminates impurities highly effectively.
This is a pre-treatment process of producing biodiesel, helping clients clean the used cooking oils by removing particles, water content, gas content, etc…
This oil recycling machine is installed a Plate Pressure system as extra option to separate the sundry goods, big-size particles and water from the oil quickly and effectively if the oil contains too many particles.
Two primary filters and fine filter combined for removing various sizes of impurities thoroughly. Next, the machine adopts highly vacuum system to dewater and degas. In addition, this machine use stainless steel filter element, it resists the acid in oil strongly. So, the used cooking oil was recycled by machine and become clean.
According to treated oil usages, there're different machine bodies for you. For edible usage, we suggest choosing full stainless steel body; for industrial, we suggest choosing carbon steel body.
Oil Result after Purification
Moisture (water content) |
≤100 PPM
(remove 100% of free water and 99%of issolved/emulsified water) |
Gas Content |
≤0.01% |
Suspended Particles (Filtration precision) |
≤ 5 micron |
Demulsification |
New oil≤15min, running oil≤30min |
Cleanliness |
≤NAS 1638-Grade 5 |
Features:
1. Equipped with strong press filter, remove the big or tiny impurities.
2. Equipped with high vacuum oil filtration system along with three stages of stainless steel material filters.
3. Special water separator filter mainly removes the mass water from the waste cooking oil.
4. Adopts three-dimensional duplex evaporation and film evaporation to separate and remove tiny water, soluble water, acid, alcohol, other volatility liquid, etc., completely and effectively.
5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
6. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak.
7. The whole machine is made of Fully Stainless Steel materials for food class edible purpose.
Technical Specification:
Item |
Unit |
COP-E-10 |
COP-E-20 |
COP-E-30 |
COP-E-50 |
COP-E-100 |
COP-E-150 |
COP-E-200 |
COP-E-300 |
Flow rate |
L/H |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
Vacuum degree |
Mpa |
-0.06 ~ - 0.095 |
Working pressure |
Mpa |
≤0.4 |
Temperature Control Range |
ºC |
0 ~ 100 |
Operation Temperature |
ºC |
50 ~ 70 |
Demulsification |
Min |
New oil≤15min, running oil≤30min |
Power supply |
|
380 VAC, 50 Hz, 3 Phase (or as per required) |
Working noise |
DB (A) |
≤ 65 ~ 90 |
Electric heating power |
KW |
18 |
24 |
26 |
30 |
48 |
60 |
96 |
135 |
Total electric power |
KW |
19.3 |
25.3 |
27.6 |
32.6 |
56 |
69 |
106.5 |
147 |
Inlet (outlet) caliber |
mm |
Ф25 |
Ф25 |
Ф25 |
Ф32 |
Ф42 |
Ф50 |
Ф50 |
Ф60 |
Dimension (L × W × H) |
mm |
1500 x1000 x 1500 |
1550 x1050 x1600 |
1600 x1050 x1650 |
1600 x 1150 x1700 |
1750 x1250 x 1800 |
1900 x1600 x1950 |
1900 x1700 x2000 |
2100 x1700 x2100 |
Weight |
Kg |
450 |
550 |
600 |
750 |
850 |
1000 |
1200 |
1500 |
Note: 1. The dimension and weight will be changed with changing of technical specs.
2. All the specs can be customized according to client's requirements.
Packing, Shipping & Payment