ASTM D924 Transformer Oil Dielectric Loss Tester/ Tan Delta Oil Tester/ Insulating Oil Power Factor Tester

• After-sales Service: Online, Video, Call, Email Supports or on-Site
• Warranty: 1 Year
• Max Diameter of Workpiece: <500mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Tan Delta Oil Tester
• Mass Scope of Workpiece: 21 Kgs
• Type: Insulating Oil Dielectric Loss Tester
• Accuracy Grade: +-0.5%
• Display: Digital
• Control: Computer Control
• Weight: 21 Kgs
• Power Source: AC 220V, 50Hz
• Measurement Range 01: Capacitance: 5PF-200PF
• Measurement Range 02: Relative Permitity 1.000 ~ 30.000
• Measurement Range 03: Dielectric Loss Factor: 0.00001 ~ 100
• Measurement Range 04: DC Resistivity: 2.5 MΩm-20 TΩm
• Temperature Range: 0 ~ 125 Degree
• Temperature Measurement Error: +-0.5 Degree
• AC Experimental Voltage: 0 ~ 2200V, Adjustable Continuously
• DC Test Voltage: 0 ~ 600V, Adjustable Continuously
• Power Consumption: 100W
• Ambient Temperature: 0 ~ 40 Degree
• Relative Humidity: Less Than 80%
• Certificate: CE, ISO, SGS
• Delivery Time: 7 Days
• Transport Package: in Standard Exportation Plywood Case
• Specification: 420 * 380 *385mm3
• Trademark: FUOOTECH
• Origin: Chongqing, China
• HS Code: 9030899090
• Production Capacity: 2000 PCS/Month
• Package Size: 50.00cm * 36.00cm * 42.00cm
• Package Gross Weight: 22.000kg

Product Description

ASTM D924 Transformer Oil Dielectric Loss Tester/ Tan Delta Oil Tester/ Insulating Oil Power Factor Tester

FT-YJS-059 Automatic Insulating Oil Dielectric loss and resistivity tester designed  according to ASTM D924 and GB/5654 standards, which it is used for measuring dielectric dissipation factor and DC resistivity of insulating oil and other insulating liquids. The instrument integrates with test oil cell, temperature controller, temperature sensor, dielectric loss test bridge, AC test power, standard capacitor, high resistance meter, DC high voltage source and other major components.

Transformer oil dielectric loss testing equipment is used both at the stage of checking the quality of oil before feeding it into the transformer and during the use of oil in the transformer.

The primary enemies of transformer oil are oxidation, contamination, and excessive temperature. High values of Tan Delta commensurate with reduced levels of Resistivity indicate the presence of polarised contaminants, such as moisture, particles and fibres. This testing is a sensitive way to check for contamination when purchasing unused new oil, determining the progress of the oil purification process and for quality control of oil in service.

Detailed Photos

 

 

Features

1). The test cell adopts the three-electrode structure according to national standard GB/T5654-2007, with electrode spacing 2mm, which can eliminate the effects of the stray capacitance and leakage on dielectric loss test results.

2). The instrument adopts the medium frequency induction heating, PID temperature control algorithm. This heating method has the advantages of non-contact between the test cell and the heating body, uniform heating, fast speed, convenient control, and strictly control of the temperature within error range of the preset temperature.

3). Internal standard capacitor is SF6 gas-filled three-electrode capacitance, and its capacitor dielectric loss and electrical capacity are not affected by ambient temperature, humidity etc., so that the instrument accuracy can be ensured even after prolonged use.

4). AC test power supply uses AC-DC-AC conversion, which effectively prevents the fluctuations in mains voltage and frequency from affecting the dielectric loss measurement accuracy. Even use a generator, the instrument can work properly.

5). Perfect protection function. When there is over voltage, over current or high-voltage short circuit, instruments can quickly cut off high voltage, and issues a warning message. When the temperature of the sensor failure or not connected, the instrument will also issue a warning message.

6). There is a temperature limiting relay in the medium frequency induction heating furnace. When temperature above 120 degrees, the instrument frees the relay and stops heating.

7). Convenient test parameter setting. Temperature setting range 0~120ºC, AC voltage setting range 500~2200V, DC voltage setting range 300~500V.

8). Using of large TFT touch screen, with backlight and clear display. With simply set up, the instrument can be automatically tested. And automatically store and print test results.

9). Built-in real-time clock, the test date and time can be saved, displayed and printed with the test results.

10). Calibration functions of cleaned dry cell. The measurement of dry cell's capacitance and dielectric loss factor can determine its cleaning and assembly conditions. The calibration data is automatically saved and so that it facilitates the calculation of relative permittivity and DC resistivity.
 

• 

Product Parameters

Voltage supply	AC 220V±10%
Power frequency	50Hz/60Hz ±1%
Measuring range
Capacitance	5pF~200pF
Relative Permittivity	1.000~30.000
Dielectric loss factor	0.00001~100
DC Resistivity	2.5MΩm~20TΩm
Measuring accuracy
Capacitance	± (1% of reading+0.5pF)
Relative Permittivity	±(1~10)% of reading
Dielectric dissipation factor	± (1% of reading+0.0001)
DC Resistivity	±10% of reading
Resolution
Capacitance	0.01pF
Relative permittivity	0.001
Dielectric dissipation factor	0.00001
Measured temperature range	0~120ºC
Temperature measurement error	±0.5ºC
AC Test Voltage	500~2200V Continuously adjustable, frequency: 50Hz
DC Test Voltage	0~500V Continuously adjustable
Power consumption	100W
Ambient temperature	0ºC~40ºC
Relative humidity(RH)	<75%
Dimensions	500mm × 360mm × 420mm
Total weight	22KG

 

Certifications

 

Packaging & Shipping

 

 

 

Company Profile

 

 

 

 

FAQ

1). What's the payment method?
A: Payment can be done by cash T/T, L/C, Western Union, Alibaba Trade Assurance, etc.

2). How long is the delivery period?
A: Generally, it takes about 10 working days for production and then the delivery will be done timely.

3). What's the package made of?
A: The package is made of international export standard wooden case.

4). What's the delivery method?
A: By train, by air, by sea, by truck, by express, etc.

Welcome to visit our website and visit our company, welcome your inquiry and contact.