Brief Introduction:
FT-ZTS Series Multi-function Industrial Waste Oil Purification and Regeneration Machine adopts the world's most advanced pure physical low-temperature micro-filter purification technology, under different temperature conditions, the molecular chain of different oil products, the oil film wrapped oxide refractory (common oil purifier can not filter out) impurities are fully broken.
Adopting such special physical flocculation and bridging effects, this equipment can quickly separate water, oxides, metal
impurities, carbon residues, colloids, suspended substances, emulsifiers and other pollutants in the waste oil, and completely restore the physical and chemical indexes such as viscosity, acid value and flash point of the oil.
The unique oil regeneration system can restore the color of black oil to transparent and bright (except non-standard oil, engine oil, mixed oil, high temperature oil) without damaging the oil quality. The regenerated oil can be used as the national standard new oil constantly.
Specification
| Items |
|
FT-ZTS-1 |
FT-ZTS-2 |
FT-ZTS-3 |
FT-ZTS-4 |
FT-ZTS-5 |
| Single Oil Treatment Capacity |
Tons/batch |
1 |
2 |
3 |
4 |
5 |
| Oil Inlet Flow |
Liters/min |
40 |
70 |
83.3 |
100 |
110 |
| Power Consumption |
KW |
36 |
48 |
54 |
70 |
90 |
| Power Suppy |
|
380V, 50Hz, 3Phase (or as per request) |
| Working oil's temperature |
ºC |
30~100 |
| Working pressure |
MPa |
Normal pressure |
| Noise |
dB(A) |
≤ 75 |
Note: The dimension and weight will be changed with changing of technical specs.
FUOOTECH reserves the rights to any upgrading without notification.
Main Features
1.Electromagnetic Coil Heating System
The most advanced heating technology, never oxidize or break;
720 degree heating without any blind spots, the oil molecules are evenly heated and not easily damaged. No bearings, no failure;
This completely avoids the increased repair and replacement costs caused by the common heating tube being burned out due to metal chips and other fine impurities adhering to the heating tube.
2.Pure Physical Flocculation Treatment
Technology Quickly separate water, oxides, metal impurities, carbon residues, colloids, suspended substances, emulsifiers and other pollutants in the waste oil, and completely restore the physical and chemical indexes such as viscosity, acid value and flash point of the oil.
3.Unique Thin Film Evaporatory
Dopts the Thin Film Evaporator using full-bridge rectification technology to quickly and effectively separate moisture and light components.
The evaporation area is large, dozens of times that of the evaporation tower on the market, more efficient.
4.No Additional Solid Hazardous Waste
Besides the existing wastes in the oil, no additional solid hazardous waste is generated, thus reducing the cost of hazardous waste disposal.
Scope of Application :
Hydraulic Oil, Internal Mixer Oil, Cold Heading Oil, Forming Oil, Ship Oil, Cutting Oil, Rail Oil, Outer Membrane oil, Heat Treatment Oil, Gear Oil, Turbine Oil, Tire Pyrolysis Oil, Quench Oil, Transformer Oil, Drawing Oil, Bearing Oil, Pneumatic Oil, Axle Oil, Transmission Oil, Vacuum Pump Oil, Cooking Oil, Compressor Oil, Cylinder Oil, Other Industrial Waste Oils.
Specification
){kind=link}